Home/Advice/Boiler not working

Heating guide

Boiler not working?
What to check.

If you have no heating or hot water, check the boiler’s display and normal controls before calling an engineer. Don’t remove the casing or try to repair the boiler yourself.

Check for danger before checking the boiler

If you smell gas or suspect a carbon monoxide emergency, stop using the appliance, avoid flames and electrical switches, and leave the property. From outside, call the National Gas Emergency Service immediately on 0800 111 999 in Great Britain, or 0800 002 001 in Northern Ireland. For LPG, contact your supplier’s emergency service. If there is fire or immediate danger to life, call 999. Do not wait for a Home Assist repair visit.

Gas safety advice: HSE and nidirect.

1. Check what is affected

Have you lost heating, hot water or both? Is the whole home affected, or just one tap or radiator? Note when it began and whether the boiler shows a fault code. Tell us what you have noticed. You don’t need to work out which part has failed.

2. Check the thermostat, timer and display

Only continue if there are no signs of danger. Check the thermostat setting and the heating programme. Look at the boiler’s external display for an error message. If you have a separate hot water cylinder, check its timer too.

Check the instructions for your boiler model. If the pressure gauge is easy to see, note the reading and compare it with the range in the manual. Do not remove the casing, adjust unidentified valves or keep adding water to a system that loses pressure.

See Southwark Council’s heating and hot water checks. Follow the instructions for your own boiler model.

3. Know when to stop

Make a note of any fault code for the engineer. If the manual describes a reset for your situation, follow its instructions only when safe. If the fault returns, stop rather than repeatedly resetting the appliance. Arrange professional help for leaks, unusual noises, recurring pressure loss or a boiler that still won’t work.

For work on a gas boiler, use a Gas Safe registered engineer qualified for the particular appliance. Check their registration and the relevant work categories on their ID card. HSE explains this requirement in its domestic gas guidance.

What to tell Home Assist

  • Your postcode and a contact telephone number.
  • Whether heating, hot water or both are affected.
  • The make, model and any fault code, if you can read them safely.
  • When the problem began and any visible leaks.
  • Whether anyone in the household has an urgent need for heating or hot water.

Take a photo of the display if you can do so safely. Don’t restart the boiler just to make the fault happen again. If you can see a water leak, our leaking-pipe guide explains how to limit damage safely.

What happens after you contact us?

Our emergency line is available 24/7. We check the trade required and local contractor availability before a visit can be arranged. Read how an emergency repair request works for the next steps.

Need help with a boiler breakdown?

Call Home Assist with your postcode and tell us whether you have heating, hot water or neither. We’ll check whether a heating engineer is available.

Call 0800 719719 ↗
24/7 emergency line0800 719719